What aisle width do I need in Lawrenceville?

Aisle width must match your forklift's specified loaded turning requirements and the load being handled. We check the exact truck, pallet overhang, approach movements and traffic pattern before dimensioning the aisles. The longest bundle and its handling method also determine turning space.

How long does it take to get and install pallet rack?

Timing depends on the selected components, agreed drawings, delivery access and installation crew availability. We confirm the shipping and installation sequence after the scope and released work areas are settled, rather than promise a fixed number of hours or days. Tell us which receiving and shipping areas must remain active while cantilever rack is installed.

How much does pallet rack cost?

Cost depends on the rack type, dimensions, load capacity, quantity, decking or flow equipment, delivery and installation scope. We quote new material only and itemize the selected components and labor after reviewing your load list and building layout. Compare usable positions and access as well as the component list when weighing alternatives.

How much weight can pallet rack hold?

Capacity depends on arm length and rating, column and base capacity, loaded elevations and support spacing. Give us bundle weights and dimensions; adding up arm labels alone does not establish the allowed load on the complete column.

What size pallet rack do I need?

Size arms and support spacing from bundle length, depth, stiffness and weight. Column height and arm elevations must also fit the clear height, handling equipment and turning space needed for the longest load.

Cantilever Rack system in an industrial warehouse

Lawrenceville, Georgia

Cantilever Rack in Lawrenceville, GA

Lawrenceville fabrication and distribution buildings along GA-316 and Hurricane Shoals can carry a mixture of raw material, finished goods and purchased supplies. Those inventories do not turn at the same speed. When extra pallets begin covering the production staging area, the answer is to separate the storage jobs rather than use the same rack depth for everything. Long stock on the floor forces operators to move unrelated bundles before reaching the piece they need. Cantilever rack provides open-front arm storage for lumber, pipe, profiles and other loads that do not suit a standard pallet bay. The design starts with bundle length and support requirements rather than pallet count.

Cantilever Rack in Lawrenceville, GA starts with bar stock and profiles awaiting cutting. We specify arm length, spacing and capacity to the material and handling method. A long bundle needs adequate support across its length, and the aisle must allow the load to turn into position. Request a free consultation and an itemized quote from Atlanta Warehouse Racking before committing to the layout.

(404) 649-6026

Why Lawrenceville Warehouses Work With Us

Hurricane Shoals, Sugarloaf Parkway and Old Norcross Road connect different kinds of Lawrenceville warehouse activity. Fabrication material may need a clear handling path, while healthcare distribution needs repeatable picking and lot access. We use those operating differences to build a practical drawing, keeping production staging distinct from reserve storage. For GA-316-bound freight, the installation sequence also needs room for the dispatch schedule your team is already committed to meeting.

For cantilever rack, the local operating question is bar stock and profiles awaiting cutting. Cantilever warehouse racking solves a long-load access problem. We consider single-sided storage at a wall versus double-sided rows on open floor, with handling clearance for the longest bundle. Arm ratings, column capacity and the support pattern are reviewed together rather than treating every arm as interchangeable.

As a division of Warehouse Equipment & Supplies Co., we give your Lawrenceville team one contact for the drawing, scope and installation schedule. You can compare the proposed arrangement with your current process, ask for revisions and see what is included in the price. The consultation is free; the goal is a storage plan your warehouse can use, with component information available for later additions.

Free warehouse consultation

CAD layout with position counts

Installation planning with experienced crews we schedule and manage

Cantilever warehouse racking holding steel tubing

Cantilever rack storing lumber and wood products

Operations We Rack Around Here

Nearby areas we work in regularly include Sugarloaf Parkway, GA-316 corridor, Hurricane Shoals industrial, Old Norcross Road.

Manufacturing and fabrication

Building materials

Healthcare supply

Regional distribution

How Cantilever Rack Works

Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.

Columns and anchored bases

Upright columns sit on bases anchored to the floor. Base depth is set by load and arm length so the run stays stable even under an off-center pick.

Arms at adjustable heights

Arms bolt or pin into the column at set increments and move as your product mix changes. Straight arms suit boxed goods; inclined arms with a lip hold round or loose stock in place.

Column spacing against sag

Column spacing follows the material's length, stiffness, weight and required support points. We check bundle support and allowable overhang against the system specification rather than applying one spacing rule to every load.

Single-sided or double-sided

Single-sided runs go against a wall. Double-sided runs stand in open floor and load from both faces, doubling capacity per base without doubling the footprint.

What a Cantilever Rack Project Includes

Cantilever Rack work in Lawrenceville begins with the operating needs of your building in the the Gwinnett industrial belt along Sugarloaf Parkway and GA-316 area. We collect the length, depth and weight of every load family, including the longest and heaviest bundles. Your handling method matters: forklift, side loader or manual selection changes the necessary clearance. We ask whether round stock needs retention and whether sheet goods or flexible material need a different support pattern from a stiff, banded bundle.

The drawing sets column spacing, arm lengths, level elevations and working aisles. Single-sided and double-sided arrangements are compared where both fit the floor. The quote identifies bases, columns, arms, bracing, anchors and any specified retention accessories. Capacities are documented for the arms and the complete configuration; the sum of arm labels alone is not a substitute for checking the loaded column.

Installation anchors the bases, aligns and braces the run, and sets arms to the approved elevations. Before handover we review how the material is supported and how operators will place and retrieve the longest loads. Your team receives the layout and capacity information for stock allocation. If product lengths change later, arm repositioning and added levels are reviewed against the existing column and base limits before the storage pattern is altered. Before the work is closed, we review the agreed scope with your warehouse manager, identify any outstanding items and explain the component information your team should retain for future changes.

Lumber, plywood, and sheet goods

Pipe, tube, conduit, and bar stock

Steel service center inventory

Furniture, doors, and windows

Long or awkward loads currently sitting on the floor

Call (404) 649-6026

Recent Installations

Racking projects completed for warehouses across metro Atlanta, Georgia.

View More Projects

Get a Cantilever Rack Quote for Your Lawrenceville Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (404) 649-6026.

Atlanta Warehouse Racking

4485 Fulton Industrial Blvd.

Ste A #279

Atlanta, GA 30336

(404) 649-6026

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Atlanta Warehouse Racking regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.