Do you install pallet rack in Atlanta?

Yes. We coordinate design, supply and installation by experienced installation crews we schedule and manage. The work follows the agreed layout and load requirements, with rack anchored to the floor, aligned and capacity information provided at handover. Work zones and access are agreed with your warehouse team before installation starts.

What type of pallet rack do I need?

Cantilever suits lumber, pipe, profiles and long bundles that need an open loading face. Palletized cases generally belong in selective or another pallet rack system; both can be planned on the same drawing.

Can I add on to my existing pallet rack?

Yes, new additions can be planned after we identify the installed system and check connection details, dimensions and configuration capacity. Similar-looking connectors do not establish compatibility across manufacturers. Added arms also require a check of the loaded column and base limits.

How many pallet positions fit in my warehouse?

The usable count comes from a CAD layout of your actual building, not a percentage estimate. We combine pallet heights, clear height, forklift reach and the column grid, then reserve the aisles, receiving space and picking access your operation needs. For long material we count usable arm positions alongside any pallet storage.

What aisle width do I need?

Aisle width must match your forklift's specified loaded turning requirements and the load being handled. We check the exact truck, pallet overhang, approach movements and traffic pattern before dimensioning the aisles. The longest bundle and its handling method also determine turning space.

Cantilever Rack system in an industrial warehouse

Atlanta, Georgia

Cantilever Rack in Atlanta, GA

Along Fulton Industrial Boulevard, inbound freight, reserve stock and outbound staging often compete for the same working floor. A Chattahoochee Industrial District building can have a very different column grid from a southside I-285 distribution center. Adding storage only helps if receiving can still clear the dock and drivers can reach the inventory that ships today. Long stock on the floor forces operators to move unrelated bundles before reaching the piece they need. Cantilever rack provides open-front arm storage for lumber, pipe, profiles and other loads that do not suit a standard pallet bay. The design starts with bundle length and support requirements rather than pallet count.

Cantilever Rack in Atlanta, GA starts with building products that include long pipe and trim. We specify arm length, spacing and capacity to the material and handling method. A long bundle needs adequate support across its length, and the aisle must allow the load to turn into position. Request a free consultation and an itemized quote from Atlanta Warehouse Racking before committing to the layout.

(404) 649-6026

Why Atlanta Warehouses Work With Us

Our Atlanta address is on Fulton Industrial Boulevard. That gives your team a clear local contact rather than a different sales office for each part of the project. Plans for the Chattahoochee Industrial District need to account for existing columns and receiving space, while southside I-285 operations may put more emphasis on reserve depth and trailer staging. We discuss those differences using your building dimensions, not assumptions about every warehouse in Atlanta.

For cantilever rack, the local operating question is building products that include long pipe and trim. Cantilever warehouse racking solves a long-load access problem. We consider single-sided storage at a wall versus double-sided rows on open floor, with handling clearance for the longest bundle. Arm ratings, column capacity and the support pattern are reviewed together rather than treating every arm as interchangeable.

As a division of Warehouse Equipment & Supplies Co., we give your Atlanta team one contact for the drawing, scope and installation schedule. You can compare the proposed arrangement with your current process, ask for revisions and see what is included in the price. The consultation is free; the goal is a storage plan your warehouse can use, with component information available for later additions.

Free warehouse consultation

CAD layout with position counts

Installation planning with experienced crews we schedule and manage

Cantilever warehouse racking holding steel tubing

Cantilever rack storing lumber and wood products

Operations We Rack Around Here

Nearby areas we work in regularly include Fulton Industrial Boulevard, Chattahoochee Industrial District, Southside I-285, Northwest Atlanta / Marietta Boulevard.

Third-party logistics

Beverage and food distribution

Building products

Apparel and e-commerce

How Cantilever Rack Works

Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.

Columns and anchored bases

Upright columns sit on bases anchored to the floor. Base depth is set by load and arm length so the run stays stable even under an off-center pick.

Arms at adjustable heights

Arms bolt or pin into the column at set increments and move as your product mix changes. Straight arms suit boxed goods; inclined arms with a lip hold round or loose stock in place.

Column spacing against sag

Column spacing follows the material's length, stiffness, weight and required support points. We check bundle support and allowable overhang against the system specification rather than applying one spacing rule to every load.

Single-sided or double-sided

Single-sided runs go against a wall. Double-sided runs stand in open floor and load from both faces, doubling capacity per base without doubling the footprint.

What a Cantilever Rack Project Includes

Cantilever Rack work in Atlanta begins with the operating needs of your building in the the Fulton Industrial corridor and the I-285 loop area. We collect the length, depth and weight of every load family, including the longest and heaviest bundles. Your handling method matters: forklift, side loader or manual selection changes the necessary clearance. We ask whether round stock needs retention and whether sheet goods or flexible material need a different support pattern from a stiff, banded bundle.

The drawing sets column spacing, arm lengths, level elevations and working aisles. Single-sided and double-sided arrangements are compared where both fit the floor. The quote identifies bases, columns, arms, bracing, anchors and any specified retention accessories. Capacities are documented for the arms and the complete configuration; the sum of arm labels alone is not a substitute for checking the loaded column.

Installation anchors the bases, aligns and braces the run, and sets arms to the approved elevations. Before handover we review how the material is supported and how operators will place and retrieve the longest loads. Your team receives the layout and capacity information for stock allocation. If product lengths change later, arm repositioning and added levels are reviewed against the existing column and base limits before the storage pattern is altered. Before the work is closed, we review the agreed scope with your warehouse manager, identify any outstanding items and explain the component information your team should retain for future changes.

Lumber, plywood, and sheet goods

Pipe, tube, conduit, and bar stock

Steel service center inventory

Furniture, doors, and windows

Long or awkward loads currently sitting on the floor

Call (404) 649-6026

Recent Installations

Racking projects completed for warehouses across metro Atlanta, Georgia.

View More Projects

Get a Cantilever Rack Quote for Your Atlanta Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (404) 649-6026.

Atlanta Warehouse Racking

4485 Fulton Industrial Blvd.

Ste A #279

Atlanta, GA 30336

(404) 649-6026

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Atlanta Warehouse Racking regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.