Do you install pallet rack in Marietta?

Yes. We coordinate design, supply and installation by experienced installation crews we schedule and manage. The work follows the agreed layout and load requirements, with rack anchored to the floor, aligned and capacity information provided at handover. Work zones and access are agreed with your warehouse team before installation starts.

What type of pallet rack do I need?

Drive-in suits bulk quantities of a small number of SKUs, with the forklift entering each lane. Its usual single-entry arrangement works last-in, first-out; mixed inventory and frequent individual pallet picks generally favor selective rack.

Can I add on to my existing pallet rack?

Yes, new additions can be planned after we identify the installed system and check connection details, dimensions and configuration capacity. Similar-looking connectors do not establish compatibility across manufacturers. Send manufacturer details, photos, beam lengths and current elevations before ordering new bays or levels.

How many pallet positions fit in my warehouse?

The usable count comes from a CAD layout of your actual building, not a percentage estimate. We combine pallet heights, clear height, forklift reach and the column grid, then reserve the aisles, receiving space and picking access your operation needs. Deep-lane capacity is also checked against how many pallets you normally hold of each item.

What aisle width do I need?

Aisle width must match your forklift's specified loaded turning requirements and the load being handled. We check the exact truck, pallet overhang, approach movements and traffic pattern before dimensioning the aisles. Lane entry clearance is a separate check from the turning aisle outside the rack.

Drive-In Rack system in an industrial warehouse

Marietta, Georgia

Drive-In Rack in Marietta, GA

Marietta supplier warehouses around Franklin Gateway and Cobb Parkway often support both production and contractor dispatch. Small replenishment orders need immediate access, while larger receipts wait for space. When long-standing rows were designed for a different product mix, adding another bay can leave the dispatch aisle even tighter without fixing the underlying storage problem. Large lots of a few products can fill a building with aisles that add little useful selection. Drive-in rack replaces those repeated aisles with deep storage lanes. The forklift enters the structure, so truck clearance, lane fill and driver movement matter as much as the number of pallets shown.

Drive-In Rack in Marietta, GA starts with bulk packaged materials reserved for scheduled production. We establish the exact lift-truck dimensions and reserve quantities before choosing rail elevations and lane depth. Drive-through arrangements need access at both ends and a deliberate loading sequence. Request a free consultation and an itemized quote from Atlanta Warehouse Racking before committing to the layout.

(404) 800-8357

Why Marietta Warehouses Work With Us

Franklin Gateway, Marble Mill and the Cobb Parkway corridor bring together manufacturing suppliers and trade distribution. An aerospace parts room does not operate like an HVAC branch with morning contractor pickups. We ask which orders must stay accessible, where material is unpacked and when vehicles collect it. Your Marietta drawing reflects that workflow, with room for staging instead of counting every available square foot as a storage position.

For drive-in rack, the local operating question is bulk packaged materials reserved for scheduled production. Drive in warehouse racking is a bulk-storage option. It can be a poor fit for a growing SKU list or frequent individual pallet picks. We compare a uniform reserve section with selective storage for the items that need daily access, rather than forcing unlike inventories into one system.

As a division of Warehouse Equipment & Supplies Co., we give your Marietta team one contact for the drawing, scope and installation schedule. You can compare the proposed arrangement with your current process, ask for revisions and see what is included in the price. The consultation is free; the goal is a storage plan your warehouse can use, with component information available for later additions.

Free warehouse consultation

CAD layout with position counts

Installation planning with experienced crews we schedule and manage

Drive-in pallet rack lanes fitted with continuous rails

Drive-in warehouse racking loaded with bulk pallets

Operations We Rack Around Here

Nearby areas we work in regularly include Franklin Gateway, Cobb Parkway / US-41, Powder Springs Road corridor, Marietta Industrial Park.

Aerospace suppliers

Light manufacturing

HVAC and plumbing distribution

Contractor supply

How Drive-In Rack Works

Deep storage lanes replace intervening aisles. The forklift enters the structure to place and retrieve bulk pallets.

Continuous rails, not beams

Pallets rest on rails carried by upright frames rather than individual beam levels, so a lane accepts pallet after pallet at the same elevation.

The truck enters the lane

The driver travels inside the bay to place or retrieve each load. Lane width, rail height, and mast clearance get dimensioned to that specific truck, not a generic one.

One open end or two

One open end normally operates LIFO. Two open ends can support FIFO with a defined loading sequence, but both handling aisles and truck clearances must fit the plan.

Guarding built into the design

Guide rails, column guards, and rail-end protection are part of the spec from the start, because the truck enters the structure and needs a defined handling path.

What a Drive-In Rack Project Includes

Drive-In Rack work in Marietta begins with the operating needs of your building in the the Cobb Parkway and Franklin Gateway industrial pockets area. We begin with the truck that will enter the lanes: overall width, mast and backrest dimensions, lift height and loaded turning requirements. Pallet overhang, unit weight and product height are checked alongside it. SKU quantities and rotation rules establish whether one-ended drive-in or a two-ended drive through rack arrangement is a better operational match.

The CAD plan shows rail elevations, lane width and depth, entry clearances and the remaining handling aisles. We count usable positions while allowing for columns and the necessary access space. The quote separates frames, pallet rails, rail supports, bracing, floor guides and column protection. Load ratings and the intended lane loading pattern are documented for the finished configuration.

Installation includes anchoring, alignment and rail checks against the drawing. The handling path is confirmed with the specified truck and representative pallet before the system enters normal use. Your team receives capacity information and operating guidance for lane entry, placement and retrieval. We also discuss lane entry and retrieval practices, because driving inside a storage structure calls for a different daily discipline from using open selective rows. Before the work is closed, we review the agreed scope with your warehouse manager, identify any outstanding items and explain the component information your team should retain for future changes.

High volume of a small number of SKUs

Seasonal or buffer inventory held in bulk

Cold storage and freezer rooms where cube matters most

Product too fragile to floor-stack more than two high

Buildings where floor space, not height, is the binding constraint

Call (404) 800-8357

Recent Installations

Racking projects completed for warehouses across metro Atlanta, Georgia.

View More Projects

Get a Drive-In Rack Quote for Your Marietta Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (404) 800-8357.

Atlanta Warehouse Racking

4485 Fulton Industrial Blvd.

Ste A #279

Atlanta, GA 30336

(404) 800-8357

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Atlanta Warehouse Racking regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.