How do I choose rack dimensions in Atlanta?

Size the rails and lanes around the loaded pallet and the exact forklift that enters the structure. Truck width, mast clearance, load height and normal pallets per SKU establish lane width, elevations and useful depth.

When can delivery and installation be scheduled?

Timing depends on the selected components, agreed drawings, delivery access and installation crew availability. We confirm the shipping and installation sequence after the scope and released work areas are settled, rather than promise a fixed number of hours or days. Tell us which receiving and shipping areas must remain active while drive-in rack is installed.

What determines the cost of pallet rack?

Cost depends on the rack type, dimensions, load capacity, quantity, decking or flow equipment, delivery and installation scope. We quote new material only and itemize the selected components and labor after reviewing your load list and building layout. Compare usable positions and access as well as the component list when weighing alternatives.

How do you confirm pallet rack capacity?

Capacity depends on the pallet rails, supports, frames, elevations and complete lane arrangement. We specify those together from your maximum pallet weight and provide configuration ratings rather than treating a conventional beam rating as a lane limit.

Which rack system fits our inventory?

Drive-in suits bulk quantities of a small number of SKUs, with the forklift entering each lane. Its usual single-entry arrangement works last-in, first-out; mixed inventory and frequent individual pallet picks generally favor selective rack.

Drive-In Rack system in an industrial warehouse

Atlanta, Georgia

Drive-In Rack in Atlanta, GA

Along Fulton Industrial Boulevard, inbound freight, reserve stock and outbound staging often compete for the same working floor. A Chattahoochee Industrial District building can have a very different column grid from a southside I-285 distribution center. Adding storage only helps if receiving can still clear the dock and drivers can reach the inventory that ships today. Large lots of a few products can fill a building with aisles that add little useful selection. Drive-in rack replaces those repeated aisles with deep storage lanes. The forklift enters the structure, so truck clearance, lane fill and driver movement matter as much as the number of pallets shown.

Drive-In Rack in Atlanta, GA starts with bulk 3PL inventory with enough pallets to fill dedicated lanes. We establish the exact lift-truck dimensions and reserve quantities before choosing rail elevations and lane depth. Drive-through arrangements need access at both ends and a deliberate loading sequence. Request a free consultation and an itemized quote from Atlanta Warehouse Racking before committing to the layout.

(404) 649-6026

Why Atlanta Warehouses Work With Us

Our Atlanta address is on Fulton Industrial Boulevard. That gives your team a clear local contact rather than a different sales office for each part of the project. Plans for the Chattahoochee Industrial District need to account for existing columns and receiving space, while southside I-285 operations may put more emphasis on reserve depth and trailer staging. We discuss those differences using your building dimensions, not assumptions about every warehouse in Atlanta.

For drive-in rack, the local operating question is bulk 3PL inventory with enough pallets to fill dedicated lanes. Drive in warehouse racking is a bulk-storage option. It can be a poor fit for a growing SKU list or frequent individual pallet picks. We compare a uniform reserve section with selective storage for the items that need daily access, rather than forcing unlike inventories into one system.

As a division of Warehouse Equipment & Supplies Co., we give your Atlanta team one contact for the drawing, scope and installation schedule. You can compare the proposed arrangement with your current process, ask for revisions and see what is included in the price. The consultation is free; the goal is a storage plan your warehouse can use, with component information available for later additions.

Free warehouse consultation

CAD layout with position counts

Installation planning with experienced crews we schedule and manage

Drive-in pallet rack lanes fitted with continuous rails

Drive-in warehouse racking loaded with bulk pallets

Operations We Rack Around Here

Nearby areas we work in regularly include Fulton Industrial Boulevard, Chattahoochee Industrial District, Southside I-285, Northwest Atlanta / Marietta Boulevard.

Third-party logistics

Beverage and food distribution

Building products

Apparel and e-commerce

How Drive-In Rack Works

Deep storage lanes replace intervening aisles. The forklift enters the structure to place and retrieve bulk pallets.

Continuous rails, not beams

Pallets rest on rails carried by upright frames rather than individual beam levels, so a lane accepts pallet after pallet at the same elevation.

The truck enters the lane

The driver travels inside the bay to place or retrieve each load. Lane width, rail height, and mast clearance get dimensioned to that specific truck, not a generic one.

One open end or two

One open end normally operates LIFO. Two open ends can support FIFO with a defined loading sequence, but both handling aisles and truck clearances must fit the plan.

Guarding built into the design

Guide rails, column guards, and rail-end protection are part of the spec from the start, because the truck enters the structure and needs a defined handling path.

What a Drive-In Rack Project Includes

Drive-In Rack work in Atlanta begins with the operating needs of your building in the the Fulton Industrial corridor and the I-285 loop area. We begin with the truck that will enter the lanes: overall width, mast and backrest dimensions, lift height and loaded turning requirements. Pallet overhang, unit weight and product height are checked alongside it. SKU quantities and rotation rules establish whether one-ended drive-in or a two-ended drive through rack arrangement is a better operational match.

The CAD plan shows rail elevations, lane width and depth, entry clearances and the remaining handling aisles. We count usable positions while allowing for columns and the necessary access space. The quote separates frames, pallet rails, rail supports, bracing, floor guides and column protection. Load ratings and the intended lane loading pattern are documented for the finished configuration.

Installation includes anchoring, alignment and rail checks against the drawing. The handling path is confirmed with the specified truck and representative pallet before the system enters normal use. Your team receives capacity information and operating guidance for lane entry, placement and retrieval. We also discuss lane entry and retrieval practices, because driving inside a storage structure calls for a different daily discipline from using open selective rows. Before the work is closed, we review the agreed scope with your warehouse manager, identify any outstanding items and explain the component information your team should retain for future changes.

High volume of a small number of SKUs

Seasonal or buffer inventory held in bulk

Cold storage and freezer rooms where cube matters most

Product too fragile to floor-stack more than two high

Buildings where floor space, not height, is the binding constraint

Call (404) 649-6026

Recent Installations

Racking projects completed for warehouses across metro Atlanta, Georgia.

View More Projects

Get a Drive-In Rack Quote for Your Atlanta Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (404) 649-6026.

Atlanta Warehouse Racking

4485 Fulton Industrial Blvd.

Ste A #279

Atlanta, GA 30336

(404) 649-6026

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Atlanta Warehouse Racking regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.